| JP-S0501 | JP-S1001 | JP-S1501 | JP-S2001 | JP-S3001 | JP-S5R01 | JP-S10R1 | JP-S20T1 | ||
| Maximum Speed (mm/sec) |
216 | 200 | 210 | 200 | 100 | 50 | |||
| Repeatability (mm)＊1 |
±0.01 | ||||||||
| Main Unit | Dimensions WxD x H(mm) |
65x155 x 455 ～805 |
65x155 x 455 ～655 |
80x196 x 505 ～995 |
80x196 x 505 ～925 |
100x259 x 570 ～930 |
148x365 x 643 ～943 |
200x465 x 889 ～1,189 |
292x442 x 1,499 ～1,699 |
| Weight(kg) | 12～18 | 12～16 | 20～35 | 20～33 | 35～55 | 98～135 | 198～272 | 387～437 | |
| Controller | Dimensions WxDxH(mm) |
79×163×287 | 104×188×328 | 147x188x365 | |||||
| Weight(kg) | 3 | 5 | 8 | ||||||
＊1 Position repeatability is not a guarantee of absolute precision.
＊ These values are for standard models and may differ with specification modifications.
Please contact us for details.
- When configuring your facility for use with this product, be sure to perform your own risk assessment.
Common Specifications
| Pressing Modes |
|
||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Sensor Modes | Step Sensors | ||||||||||||||||||||||||||
|
Position Sensor (Start of Step) Position Sensor (End of Step)
|
|||||||||||||||||||||||||||
| Load Zone Sensors | |||||||||||||||||||||||||||
Sensor judgment made for the whole program
Set up to 32 (position range) zones |
|||||||||||||||||||||||||||
| Program Sensors | |||||||||||||||||||||||||||
Sensor judgment made when all steps are complete
|
|||||||||||||||||||||||||||
| External Interface | Ethernet, RS-232C | ||||||||||||||||||||||||||
| Open Fieldbus*2 | DeviceNet, CC-Link, PROFIBUS, CANopen, PROFINET, EtherNet/IP : Please choose when you place your order. | ||||||||||||||||||||||||||
| External Input/Output | DIO (I/O： 17 inputs 16 outputs, NPN/PNP: Please choose when you place your order.) | ||||||||||||||||||||||||||
| Other Outputs | Motor Encoder Output, Analog Monitor Output, Load Cell Output | ||||||||||||||||||||||||||
| Setting Device | PC or Optional Pendant Unit | ||||||||||||||||||||||||||
| Drive Power Source | Single Phase, 3 Phase 180～250V (for presses up to 20kN) 3 Phase 180～250V (for presses 30kN and larger) |
||||||||||||||||||||||||||
| Controller Power Source | DC24V | ||||||||||||||||||||||||||
| Temperature | 0～40°C | ||||||||||||||||||||||||||
| Relative Humidity | 20～90% (Without condensation) | ||||||||||||||||||||||||||
| Ingress Protection (IP) Rating | IP20 | ||||||||||||||||||||||||||
*2 CANopen is compatible with JP-S System Software Ver.4.8.0 and above. PROFINET is compatible with JP-S System Software Ver.6.2.1 and above. EtherNet/IP is compatible with JP-S System Software Ver.6.3.1 and above.
- Specifications may be modified without prior notice to improve product quality.
Standard Accessories
- Main Unit Cable
- Power Cable
- Operation Manual (CD-ROM)
For more details, please refer to the product catalog.
Optional Attachments
- PC Software: JP-S SaS System WindowsR 7/ WindowsR 8.1/ WindowsR 10 compatible)*3
- Pendant Unit
- DIN rail attachment board
*3 In order to operate the JP-S SaS System with a touch panel PC (HMI), make sure to use the Microsoft WindowsR Embedded Standard 7 “WS7P” Windows Touch package license.
For more details, please refer to the product catalog.
